1. Compatible Models: Huawei Wyatt V9_V9U_V9E_V9A_V8. Other models may have a "remote" switch or a "remote maintenance" option, which can be attempted to unlock. Note: The position of the wireless switch can be set by pressing the remote control settings and entering advanced options. You might need to enter a code (the password is often the operator's customer service number like 10000, 10086, 10010, or other codes such as 8288, 6321, 2878, 3008, 8005, etc.). For testing purposes, you can use the code 131022. Try turning on the remote maintenance switch and see if it works; if not, try other methods.
Crack File Download Link: http://pan.baidu.com/s/1dFq6qxN Password: 6gcy
2. How to Use (Important): This method is suitable for all Huawei boxes customized for different operators, and most other boxes that allow ADB access can automatically install the software. Note: To use this method, make sure to unplug the network cable, connect via WiFi to the same router as your computer, and ensure both are on the same network. Turn on the STB, enable ADB, and run the crack bat file.
3. For Huawei Custom Boxes: Place the box and computer on the same network, unplug the Ethernet cable, note the IP address from the wireless connection, and ensure the Ethernet is set to DHCP mode. Access the box: Settings - More (or Advanced) - Remote Connection Control, set it to "Allow." Some boxes require a verification code after enabling the remote maintenance switch. If there’s no code, enter "287aW" (note the lowercase 'a' and uppercase letters). It's best to copy the red text directly, including the small dot before it.
4. Run the attached STBManageTool, import the license, enter the IP address, and fill in the password ".287aW" (with a dot at the beginning). If a verification code is required, input it here. Click Connect, then browse for the .dat file under STB, select Import. The default action is to double-click the file, and then click Import License to return to the homepage.
5. Next, enter the IP address of the WiFi connection in the top-left corner. The default username is "Huawei," and the password should be filled in based on the fourth message. After connecting, the box information will appear. Then, enable remote login in the lower right corner, switch it to "On," and click Submit. The first step is shown at the bottom left.
