There has been a serious imbalance in the development of the Internet of Things. Compared with eMTC, China is more focused on NB-IoT, and eMTC is slower than NB-IoT. For eMTC, China has no clear timetable and only knows that it will be slower than NB-IoT for half a year.
Today, the Internet of Things is simply the scent of the industry, and NB-IoT and eMTC are two technologies in the field of Internet of Things, each with its own advantages and focus: NB-IoT has its own low power consumption, wide coverage, low cost, and large Its advantages such as capacity make it widely used in a variety of vertical industries, such as remote meter reading, asset tracking, intelligent parking, and smart agriculture. Compared with NB-IoT technology, eMTC's main advantages are higher transmission rate, lower latency, support for switching, support for VoLTE voice communication, etc., so it can support medium and low-rate IoT applications, such as electronic billboards and logistics. Transportation, smart city, wearable devices, smart POS, industrial control and other applications.
Throughout the world, other operators such as AT&T, Verizon, KDDI, KPN, Orange, NTT DoCoMo, Telefonica, Telstra, Telus, etc. have successively launched eMTC commercialization.
However, the country is more focused on the development of NB-IoT. For eMTC, China Mobile has not proposed a clear timetable, but it is indicated that it will be slower than NB-IoT for about half a year; China Telecom has launched an eMTC scale field trial and announced commercial use in 2018; China Unicom has started eMTC pilot test in 4 cities. It is planned to start commercial trials in major cities in early 2018 and start the national commercial process in mid-2018.
China Unicom: 4 cities started eMTC pilot test in the middle of 2018
Lu Yimin, general manager of China Unicom, revealed at the World Internet Conference: At present, China Unicom has realized the service of NB-IoT connection in 300 cities. At the same time, in order to promote the development of the Internet of Things industry, China Unicom has set up a 10 billion industrial fund to promote it.
In addition to NB-IoT, China Unicom also launched multi-city eMTC experiments this year. It can be said that China Unicom has both NB-IoT and eMTC development strategies listed on the market.
It is reported that in the third quarter of 2017, China Unicom launched eMTC field trials in four cities including Beijing, Guangzhou, Shenzhen and Changsha, and verified eMTC coverage performance and networking performance.
China Unicom plans to start commercial trials in major cities in early 2018, and it is expected to start the national commercial process in mid-2018.
China Mobile: eMTC will be slower than NB-IoT for about half a year
As early as this year's Mobile Internet of Things conference held by China Mobile, China Mobile's vice president Sha Yuejia once pointed out that China Mobile is committed to simultaneously promote the coordinated development of NB-IoT and eMTC, so as to achieve complementary technology and industry.
However, at the China Mobile Global Partner Conference held at the end of last month, China Mobile announced a 2 billion special subsidy for the construction of the Internet of Things, half of which was used to support NB-IoT modules, providing manufacturers with 60%-80 The subsidy rate is not equal to 100%, and the other half is used to support 4G IoT modules, with a maximum subsidy of 50%. At the same time, it is announced that NB cities will achieve NB-IoT continuous coverage and full commercial use by the end of 2017.
And the introduction of "concise, affordable" annual package fee program, divided into 20 yuan, 40 yuan two grades; combined with customer value, for the NB-IoT module will also set a subsidy rate of 60% -80%.
Looking at these in detail, it seems that there is no mention of eMTC.
However, Wei Wei of China Mobile Internet of Things Co., Ltd. mentioned in a speech in public on a recent occasion: "From the perspective of the entire industry development, eMTC is slightly slower than NB-IoT for about half a year, China Mobile reserves the capacity of these two fields. Will allow these two areas to develop synergistically and serve the industry together."
However, as of now, China Mobile does not have a clear eMTC commercial promotion schedule.
China Telecom: Launched eMTC scale field trials for commercial use in 2018
Similar to China Mobile, China Telecom is also a step ahead of NB-IoT, and eMTC is an emerging business area that China Telecom has focused on in 2018.
At present, China Telecom has taken the lead in completing the 800MHz NB-IoT network deployment, and the 310,000 base stations of the whole network have been upgraded synchronously. The world's largest NB-IoT network has been built, and the world's first NB-IoT package has been launched. Together with the already commercial CAT1, China Telecom will build a full range of Internet of Things based on 4G.
Moreover, it has long announced that it will invest 300 million yuan of IoT special funds to promote the maturity of the NB-IoT terminal industry chain, of which 200 million yuan subsidizes module products, 100 million yuan to subsidize 2/3/4G module products according to project needs, to promote industry thresholds and costs. The reduction of the terminal industry chain.
However, at present, China Telecom has launched an eMTC scale field trial, which is planned to be commercialized in 2018.
It is reported that China Telecom's IoT service mainly focuses on three major markets: deep cultivation of smart cities, driving innovation and development of smart cities from four dimensions: urban management, public services, public security, and people's livelihood services; layout of vertical industries, for intelligent manufacturing, wisdom Digital transformation of vertical industries such as transportation, logistics and retail industries; driving personal consumption, the personal consumption of the Internet of Things closest to the living part, the potential for business growth can be expected, China Telecom will focus on the development of sharing economy, financial payment, personal wear and The development of smart home and other fields.
What is a miniature slip ring? Miniature slip rings are rotary electrical connectors that allow power and data to be transferred between a stationary and rotating structure. They are often used in medical, military, and aerospace applications where size and weight are critical factors.
A miniature slip ring typically consists of two parts: a stationary housing and a rotating contact assembly. The contact assembly contains the brushes that make electrical contact with the rotating structure, as well as the rings that conduct current or data.
The housing can be made from any number of materials, including metals, plastics, and composites. It is typically designed to be as small and lightweight as possible while still providing adequate strength and durability.
The contact assembly is made from precious metals such as gold or silver in order to provide good electrical conductivity.
Technology improves with the continuous development of precision machinery. The more sophisticated the equipment, the smaller the volume will be. And the space that can be accommodated for installing the slip ring is also very small. The key parts of some equipment are quite a district. Especially in the high-end military, aerospace and aviation fields. 360-degree rotation is required to transmit current and signals. And the installation space is greatly reduced. It is to make the equipment work more smoothly. Therefore, it is necessary to design the slip ring to be small and exquisite. Otherwise, it won't meet the needs of the installation.
At the same time, we have moved with the continuous development of science and technology. Various high-end precision instruments have been developed. It requires the slip ring to transmit the current amount of general power. Also often undertake the transmission of weak electrical signals and various weak signals. The transmission medium is wider, and the number of loops of the slip ring is increasing.
Miniature Slip Ring,Slip Ring Parts,Slip Ring Type Induction Motor,Slip Ring Rotor
Dongguan Oubaibo Technology Co., Ltd. , https://www.sliprob.com