Samsung LED: the three magic weapons to open up the Chinese market

The first "High-tech LED Lighting Exhibition", which is known as "leading the new trend of global LED lighting product design and application", was grandly opened at the Shanghai International Convention Center in China from August 30th to 31st, 2011. During the exhibition, Gaogong LED reporters conducted an exclusive interview with Tang Naibin, the sales director of Samsung LED Lighting.

During the interview, the first topic that went straight was Samsung LED's goal in the field of lighting. Tang Naibin, the sales director of Samsung LED Lighting, said: "I hope to be the leading brand of LED lighting in China within three years, and be the first in the world within five years."

Tang Naibin believes that the traditional lighting industry has a strange circle, that is, basically no leading brand in China can achieve more than 5% market share, or a higher ratio. In the LED field, the concentration will be higher, and the top three manufacturers will account for more than 10% of the market. Although in the interview, Tang Naibin did not disclose a specific quantitative goal.

But undoubtedly, Samsung LED has been placed in high hopes for the first year of entering the Chinese market. In contrast, the performance of the Japanese and Korean markets has already increased the confidence of Samsung's lighting application products. "Our LED lighting products have entered some channels of the consumer market in Japan and South Korea, and retail terminals are With our products." The potential of China's LED lighting market is huge. It is no wonder that Samsung LED hopes to be the leading brand in the Chinese market within three years.

In the interview, Tang Naibin revealed that the strategy of Samsung LED to explore the Chinese market is: B2B agent channel, the overall solution for LED lighting, and standardized modules.


2V Battery Pulse Restore System fully take into account the inconsistent of the physical resonance frequency between lead sulfate crystal and battery plates, select the optimal frequency of pulse waveform and pulse current intensity to "break" and "decompose" the lead sulfate crystals, ensure the best restoration effect of sulfide battery without any damage to the plates.
Off-line 2V Battery Smart Pulse Restore System, also be called  Battery Reconditioner or Battery pulse maintainer and  Reviver: mainly used in the whole industry of Electric Forklift power battery, Sightseeing car power battery, Golf Cart battery, Wind and Solar energy storage battery, UPS Back up power system, Telecom base site battery, State Grid and Military battery for Sudden affair,etc.
The system is composed of 3 parts and a professional standard restore process: 1) 2V Battery Restorer Device(100~3000Ah); 2) 2V Battery Digital Pulse Charger; 3) 2V Battery Discharge Tester.  Lead-Acid Battery Restoration system and Solution is applicable to all of Lead Acid Battery(AGM, GEL, VRLA, MF, Flooded, Dry, Traction, Deep cycle and Stationary), and widly used in 2V (200~3000Ah) cell batteries. 

Product features
1.  The smart pulse with fast rising front is resonant with the crystal of lead sulfate to dissolve the large lead sulfate crystal under the action of charging pulse, which can improve the capacity and prolong the service life of the battery.
2.  No need to add any chemical additives, does not change the internal electrolyte composition of the battery, safe and reliable; For water loss batteries only need to add deionized water before restoring. The output pulse voltage and pulse current are strictly limited.
3.  12 independent output, can repair 12PCS 2V/100Ah-3000Ah cells at the same time without interference. Each group is equipped with a separate voltmeter to monitor the voltage of the repaired battery in real time.
4.  Each system is equipped with "capacity selection" gear, according to the different capacity of the battery to select the appropriate gear, can be ensure better protection of battery plate in restore working.
5.  Each system is provided with automatic repair function, automatic repair system will smartly adjust the pulse duty ratio based on the receptivity of the battery without anyone on duty
6.  Each system is equipped with "High resistance repair" function, select the high resistance repair, specially for the long term stored batteries, even if the OCV is 0 Volt, but also can be easily activated.


2V Battery Restore System

2V Battery Restore System,Battery Optimizer Reviver Recover,2V Battery Equalize Charger,2V Cell Smart Charger

Shenzhen Daceen Technology Co., Ltd. , https://www.daceen-sz.com