The new VR sound and dance game "heat dance partner" burst Cj

Last week at 2017 ChinaJoy, a number of top-tier domestic games caught everyone's attention, with themes centered around war, combat, and gunfights. In the VIVE experience zone, I got to try out an impressive audio-dance game that felt like something straight out of the future, reminiscent of Hatsune Miku's performances. The demo showcased a clear stream of gameplay that had all players equipped with HTC Trackers effortlessly moving and gesturing in harmony. The live audience was buzzing with excitement, eager to give it a go themselves. It turns out this music and dance game was developed by Beijing Weiwo World Entertainment Technology Co., Ltd. for offline use. As soon as I put on the tracker, I entered a virtual stage interface where I needed to input an ID to scan my tracker and bring my virtual avatar onto the stage. Four avatar cards appeared on the screen, and I could swipe through them to select different virtual characters. There are three female avatars—cute lolis, pure goddesses, and nightclub queens—and one male dancing partner who resembles Song Zhongji’s long-legged look. These options cater to various player aesthetics. The virtual dancers look great, from their models to their costumes, with plenty of intricate details in their outfits and accessories. Each player gets three songs to choose from, all popular dance tracks. Both modes, athletics and Hyun dance, come in easy and hard settings. I chose a lovely loli avatar and tried both modes with the same song. I found the Hyun Dance mode simpler, where mimicking the virtual dance partner's moves would score points. However, the competitive mode was quite challenging, with multiple scoring points. I started going all out, realizing the scoring points weren't just along a single path. The left hand corresponded to blue strike points, the right to red ones, and tapping the correct hand scored higher points. Additionally, the depth of the strike points meant my feet were constantly moving too, making it look like I was jumping around like a madman. To outsiders, it probably looked like I was falling over. But honestly, having such a cute loli dancing in front of me made it all worthwhile! Exciting stuff! The "Dynamic Dance Partner" game breaks away from traditional music games where you just tap beats. Instead, it lets you physically jump in rhythm, with careful game design that's truly engaging. Listening to these high-quality dancers, I'm sure many people couldn’t help but get up and dance. After completing a dance, my score was clearly displayed behind the stage, with my initial input ID showing up on the leaderboard. During play, I noticed a few things: the dance partner was very expressive, and their movements didn’t feel constrained or rigid like typical games. According to Zhang Junqing, the marketing director of Weiwo World, the dance partner’s moves are choreographed by professional dancers using motion capture technology, resulting in smoother, more fluid movements. Facial expressions are also captured to create more natural and vivid characters. It's reported that Weiwo World plans to expand the number of dance partners and music library. This game is primarily being pushed for offline experiences, with interest from several chain KTVs, cinemas, and entertainment centers. Later this year, Weiwo World will also release a compact warm-up dance partner machine with a sleek design, fitting into unused spaces for VR equipment. They're also working on a PS VR version, and future online versions will include new elements. With such valuable content and diverse gameplay, I can’t wait to see what comes next!

Photocell Timer

24HR Electronic Timer socket with photocell.

â‘  Light intensity setting

â‘¡ Light intensity detection

â‘¢ Countdown Timer ON & OFF

â‘£ 4 MODES:

Set > Detected: When the light intensity detection value is less than the set value, switch ON or OFF.

Detected > Set: When the light intensity detection value is greater than the set value, switch ON or OFF

ON : Always ON

OFF : Always OFF

NOTED:

1. The light intensity displayed by this machine is not the standard light intensity value (Lux), only the relative light intensity value.

2. The light intensity value is affected by the placement position and direction. Please determine the position first and then set it according to the actual light intensity detected. If you change the position or change the orientation, you need to reset the light intensity setting value suitable for the new position.

3. This product has built-in rechargeable battery. If it is not connected to AC for a long time, you need to connect the power supply to charge until the LCD can display normally.

MANUAL OPERATION

1. Press [UP" or [DOWN" to set the LUX value.

2. Press the [SET" key to start setting, and the P1 settable items will be flashed.

3. Press [UP" or [DOWN" to adjust the value.

4. Press [SET" key again to exit setting or enter next setting for countdown timer.

5. Repeat the [SET" key to start setting, and the P2 & P3 settable items will be flashed.

6. Press the [FUN" key to switch the working state in the following:

Set > Detected -> Detected > Set -> ON -> OFF

Set > Detected: Automatically switches when the detected ambient light intensity is darker than the set value

Detected >Set: Automatically switch when the detected ambient light intensity is brighter than the set value

When the brightness meets the setting conditions, the countdown starts as below:

Note:when the countdown is ON, the detected value is not displayed.

When the brightness does not meet the setting conditions, the countdown stops and waits:

After the countdown ON is reduced to 0, the countdown OFF starts immediately and the power is OFF.

After the countdown OFF is reduced to 0:

A. If the light intensity meets the set conditions, a new round of countdown will be started;

B. If the light intensity does not meet the set conditions, keep the power off and wait for the light to meet the conditions before turning on automatically.

NOTE:

1. If the power is cut off while the countdown is running, the countdown will be terminated immediately and the relay output will be off. After the power is turned on again, a new round of brightness detection will start.

2. Modifying the brightness value in the countdown operation will not affect the current countdown operation. After the off time of the current countdown, the new brightness setting value will take effect.

3. In the countdown on operation, change the setting value of the countdown on, this countdown will still be timed according to the original setting value; the new setting value will take effect when the next countdown on starts.

4. In the countdown off operation, change the setting value of countdown off, this countdown will still be timed according to the original setting value; the new setting value will take effect when the next countdown off is started.

NOTE: the brightness setting value, countdown ON or countdown OFF, any one of which is equal to 0, cannot be switched ON or OFF automatically.

Manual Control

When ON or OFF is displayed, it means that the power supply remains ON or OFF, as shown in the figure below:

Power Detection and Standby Mode

With AC power supply, the icon lights up and works normally.

When there is no AC power supply, the icon goes out, the brightness is not detected at this time, and the system enters the standby mode.

Photocell Timer, photocell timer socket, photocell sensor, photocell sensor socket, sensor plug, sensor switch socket, digital photocell timer, digital sensor timer

NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com