Coexistence of size and function: a low-priced mechanical keyboard recommended RAPOO Pennefather V500S

Foreword:

104 expensive + big, 87 without a keyboard, which kind of keyboard to buy? Give you a refugee keyboard.

That's right, it's refugee level. Spraying Pyramid's detour, domestically-made keyboards feel relatively good brands—it's cheap and easy to use.

This keyboard was purchased from Freshman's first intake (in September 2015) (started in 200), and the current price has dropped to a very favorable level: 100+ stalls

Rapoo (Rapoo) V500S Backlit Mechanical Gaming Keyboard Black Green Axis $149 A keyboard with a sense of well-being The Jingdong direct link View Encyclopedia

Rapoo V500 mechanical gaming keyboard black black shaft 119 yuan to buy a keyboard with a sense of well-being Jingdong direct link to Wikipedia


With great experience, it is recommended to everyone.

Mainly for: size, function, price and other aspects.

Ps: The full-text evaluation angle is limited to my personal perspective. Please instruct, but please bypass.

------------------- I am a cute divider -------------------

//(Calculate the comment, then talk to you later) Purchase, recommendation reason:

The old image of the text (the overall effect does not like light pollution):

A bit dirty don't care about the details

Basic parameters

ABS key caps, simple design, Pennefather's own axis, backlight (optional), black, white, tea, blue, black shaft optional.

basic skills

87 keys + some function keys (function keys look at the figure, recommended reasons also from here)

The above figure shows: F12 key position has brightness adjustment, mute, lock Win, big M (rightmost right) key to the right.

Solve the difficulty of purchasing small size and large size

Is it not convenient to use the right key of the 87-key position to play numbers, but at the same time, you need to use function keys occasionally?

104 keys are too large or the price is relatively expensive?

Haha this article is for you to write, the following is a solution (in the case of Pyramid keyboard)

First through the Pennefader driver support we can change the key mapping (change function)

That is, the nine function keys (delete, etc.) above the arrow keys are changed to numeric keys (1, 2, 3,...), F12 is changed (Delete, F12 is required, others can be changed, I basically do not use F12 but use Delete a lot), brightness adjustment two to page up&down, mute key to the number 0.

At this point, the basic key position transformation is completed, and then the key point: the above change key position scheme will be driven and saved as “scheme one” which means that the scheme can be switched (closed). At this time, please use the big M key (see the upper right corner of the figure above) to appear. . Press this key, the key can be restored to the factory (you can use function keys, such as screenshots).

That is, the large M can switch the function keys/numeric keypad functions of the direction keys.

This completes the compromise between size and function.

to sum up:

Set an ad:

This should become the young man's first mechanical keyboard

Compared:

Pennefather new mechanical keyboard without large M key can not complete this strategy

Rapoo V500 alloy mechanical keyboard game keyboard black tea shaft 99 yuan cheap, is a recommended entry keyboard Jingdong direct link to encyclopedia


------------------- I am a cute divider -------------------

Another simple evaluation of this keyboard (subjective use of feelings)

Brand: Pyramid used many of his family's products. It feels like it is a good brand, and it has achieved the best quality at a low price. The next keyboard is ready for ikbc.

Keycap: ABS, this is the next time you want to ikbc, ABS oil is serious, IKBC Pbt material may be better.

Shaft body: Pyroban's autonomous green axis is the first time it touches a mechanical keyboard. When it was middle school, it was an internet cafe. The keyboard was a brand called Shengmeirui (maybe many people don't know), cherry tea shaft. The next keyboard is ready to enter the axis of the tea, but for the first time, a friend of the mechanical keyboard has recommended the green axis.

In addition, domestic/cherry parameters have not been studied specifically, but subjective use feels that the individual feels that many domestic axes are close to the cherries, so novices may not feel the difference. Therefore, if a price factor is added, the newbie does not necessarily have to buy cherries. of.

Another reason to write this article is to hope that a considerable number of people who believe that mechanical keyboards can cost hundreds of thousands more than their psychological expectations may wish to try this ultra-low-priced Pennefather v500s.

Detail image:

Workmanship exceeded expectations for this price point and was generally satisfactory.

Another: The fully closed design is not clean, it may be better to suspend the keycap.

Only a single orange light, individuals do not like light pollution this just right.

And the following most want to put the figure = = (heavy oil)

So it is best to buy a pbt keycap, mainly to replace the letter area just fine, you can Taobao search.

Some of the official renderings extracted from Jingdong (multi-map warning)

The next keyboard to get started

Ikbc c87 Cherry Shaft Mechanical Keyboard 87-key Original Cherry Shaft White Tea Shaft 399 yuan iKBC C87, 87 keys No numeric keypad. Built-in CHERRY (cherry) original MX axis, optional black, blue, tea, red, milk, green six keyboard axes. For the original axis mechanical keyboard, the price is also close to the people. However, iKBC also reserves enough room for players who are not satisfied with the basic functions. The C104 is equipped with an ARM 32-bit processor that can extend the LED backlight function. The lamp position is reserved below the keycap. There is no direct link to Jingdong.

Over

At last

Again, this article may be limited to personal perspectives, and minor issues are welcome to discuss.

Please use your rhythmic jet.

If you have other opinions and completely deny yourself, please open another post. I hope everyone will not spray me.

Grounding Transformer

Applications:

The grounding transformer is a kind of auxiliary transformer that used to offer an earth point for the Delta-Star system. They are typically used for providing a path to ground for unbalanced load current and for fault currents on system where a suitable ground is otherwise not available.

Design:

The grounding transformers are generally designed with one of the two configurations: Zig-Zag (Zn) with or without an auxiliary winding or a Wye (Ynd) with a delta connected secondary. The Zig-Zag connection is preferred as it is more cost effective and have smaller size than the Delta-Wye unit. For more safety, neutral earthing resistors (NER) are often used in conjunction with the grounding transformer to limit neutral ground fault current magnitude. The rated voltage of the NER should be equal to the line to ground voltage of the grounding transformer. The current rating and duration should match the grounding transformer


Why SCOTECH

Long history- Focus on transformer manufacturing since 1934.

Technical support – 134 engineers stand by for you 24/7.

Manufacturing-advanced production and testing equipment, strict QA system.

Perfect service-The complete customer service package (from quotation to energization)





Grounding Transformer,Neutral Grounding Transformer,Neutral Earthing Transformer,Neutral Grounding Transformer For Generator

Jiangshan Scotech Electrical Co.,Ltd , https://www.scotech.com