LED landscape lighting welcomes new development opportunities

LED landscape lighting welcomes new development opportunities The night landscape is gradually being appreciated by people in the presence of a piece of art. People use lights to express the artistic form of the scenic night. As a result, the landscape needs personalized LED landscape lighting art to render. The wonderful scenic lighting is like a eloquent speaker, using its fine art language to tell each visitor who came to visit its value in the hearts of everyone.

Landscape lighting is a reflection of the beauty of scenic spots and the culture of scenic spots. The image display of the scenic night has also become one of the important deployments of the Tourism Bureau. Undoubtedly, if the image of the night is decorated with less lights, then it has nothing to do with the word “beautiful scenery,” so it seems that the future of landscape lighting Still worth the wait. At present, local governments will accelerate the construction of urban scenic spots, use the tourism industry to promote the development of local economies, and enhance the city's night image has been included in the government's work plan. At the same time, China's landscape lighting standards have been gradually introduced, which will further promote the development of China's landscape lighting industry.

In this era of full “visual impact”, some second- and third-tier cities also follow the pace of progress. The promotion of landscape lighting visual art not only enhances the scenic spot image, but also enables people living around this scenic spot to experience a more beautiful nighttime environment and a sense of pride. At the same time, it also brings economic benefits to the development of the city. The promotion role of tourism in the second and third tier cities cannot be discounted. The local government and tourism bureau naturally think of this point. Therefore, the development of tourism industry will surely receive strong support from local governments. Tourism in the second and third cities is increasingly valued by the Tourism Bureau and the local government. This will also be the subject of continuing landscape lighting.

In fact, many second- and third-tier cities have very developed tourism value. The primary chip for these second- and third-tier cities to promote to the outside world is to strengthen the construction of scenic night scenes. How we can make these scenic spots beautiful and beautiful during the day, and at night we can still be beautiful, full of charming and energetic, which requires us to vigorously develop lighting at night. Lighting designers are constantly researching the symbiotic relationship between light and art, focusing on precise control and differentiation of light according to different cases. At this time, light includes not only lighting requirements but also visual art components. This is “light. surroundings". At present, the best manifestation of the "light environment" is LED light sources, and the night lighting source that best reflects the scenic characteristics and culture can be said to be a non-LED light source.

While China's landscape lighting projects are in full swing, the management departments of various local governments are also setting up relevant expert review committees to conduct an artistic review of the lighting projects of each lighting project to ensure the organic unity of the ornamental and practical aspects of Lianghua Engineering. According to the author's understanding, some of the second and third tier cities such as Enshi, Chongqing, Yichang, and Zhangjiajie have adopted LED street lights on the newly-reconstructed provincial roads and national highways. Some of the upcoming developments on tourist attraction bids have also been clearly stipulated: It is required that the lighting of the sights on the project needs energy saving and environmental protection, and LED lighting exactly meets this requirement.

The High-mast Lamp is generally refers to the new lighting device which is composed of the steel taper light pole and the high power combination lamp frame of 15 meters or above.It consists of lamp holder, internal lamp, electric rod body and basic part.Lamp head modelling can according to user requirement, surroundings, lighting need specific and definite;The interior lamps are mainly composed of floodlights and projection lamps. The light source adopts NG400 high pressure sodium lamp, and the lighting radius is 60 meters.The bar body is usually a pyramid structure, which is made of steel plate, with a height of 15 to 40 meters, which consists of two to three sections.

High Mast Light Poleled street light

Material characteristics

1. Beautiful appearance, large lighting area, good lighting effect, concentrated light, uniform illumination, small glare and easy to control and repair.

2. Applicable places: city square, station, wharf, highway, stadium, overpass, etc.

3. The lamp pole is a high quality steel plate by moulding into a multi - pyramid splicing steel rod, through hot galvanizing anti-corrosion treatment.

4. The lamp frame is made of high quality stainless steel.

5.  Fasteners bolts and nuts are stainless steel.

6. Light source:400W-1000W sodium lamp. 

Specifications:

 

Height: from 18m to 50 m

Suit for: highway, expressway, parkway, freeway, central motorway junction, truck and bus terminals, railyards, ship docks, airports, ferry terminals, prisons, industrial and commercial sites, international borders.

Shape: round, multi-pyramidal, column form, polygonal or conical

Material:
    
Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2

Tolerance of  Dimension: ±2%

Lighting Source: 400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m²

Light plate: Various figure of selection ,material with hot dip galvanization steel frame

Lifting System: Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute
Equipped e; ant ferromagnetism brake and break -proof device, manual operation applied under power cut

Electric Appliance Control Device: Electric appliance box to be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode

Surface treatment: Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.

Joint of Poles: Insert mode, inner flange mode, face to face joint mode .

Design of pole: Against earthquake of 8 grade

Wind Speed: 80 Km/Hour

Welding: We has past flaw testing. Internal and external double welding makes the welding in shape

Thickness: 6 mm to 20 mm

Production Process:
Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging

Packages: Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required    


 




High-Mast Lamps Series

High-Mast Lamps Series,High Mast Lamps,High Mast Light,High Mast Light Pole

Jiangsu chengxu Electric Group Co., Ltd , http://www.chengxulighting.com