In January 2010, the revenue of LED Taiwanese factories remained good. The revenues of Jingdian and Yiguang in January were all higher than those in December 2009. The wire frame factory has a good performance in Huaxing, a packaging factory.
Jingdian originally planned to add 20 MOCVD machines in the first half of 2010, and another 10 additional units, indicating that the LED industry demand has not subsided.
Everlight also began to ship SMD-type LEDs for LED-backlit TVs in January. Ye Weifu, chairman of Everlight, also pointed out that Q1 is not weak in the light quarter, and revenue in January will be better than December.
In January, the consolidated revenue was NT$466 million, a substantial increase of 198.22% from the 156 million yuan in the same period of 2009. This was mainly due to the capacity of Samsung Pack, a lead frame, and shipments began in January. In order to support Samsung's demand, we will expand and expand the 2,000-pyeong factory and expect to join the operation in February. The monthly production capacity of the SMD lead frame has been increased from 800 million to 1 billion. After the completion of the new plant, the production capacity of the lead frame can be increased by another 50% to reach 1.5 billion pieces per month.
Huaxing has received a long-term order for low-temperature lighting from US freezers Hussmann and Coca-Cola Mexico, and has shipped in large quantities since January, making Huaxing's January revenues likely to hit a new monthly high. (Edit: Looking up at the stars)
Thick Copper PCB are used extensively in power electronic devices and power supply systems. A growing trend in the PCB industry, this unique type of Heavy Copper PCB features a finished copper weight of more than 4oz (140μm), compared to the 1oz (35μm) or 2oz (0μm) copper weight generally found in those with a Standard PCB copper thickness.
The additional copper PCB thickness enables the board to conduct a higher current, achieve good thermal distribution and implement complex switches in a limited space. Other advantages include increased mechanical strength at connector sites, the ability to create a smaller product size by incorporating multiple weights on the same layer of circuitry and the ability to use exotic materials to their maximum capacity with minimal risk of circuit failure.
PCB Manufacture Capabilities
|
Features |
Capabilities |
|
Layers |
1-36 layers |
|
Material |
FR-4, Aluminum, Copper, Polyimide, high frequency (Rogers, PTEE, PI), etc. |
|
PCB Type |
FR-4 Standard PCB, Aluminum PCB , Copper-based PCB, HDI PCB , Rigid-Flex PCB, Flex PCB, Thick copper PCB and Rogers PCB, etc. |
|
Board Thickness |
0.1mm-6.0mm |
|
Copper Thickness |
1/2oz-6oz(18um-210um) |
|
Biggest Board size |
600mm*1200mm |
|
Min Tracing/Spacing |
0.075mm/0.075mm (3mil/3mil) |
|
Min drilling Hole diameter |
0.15mm(6mil), 0.1mm(4mil)-laser drill |
|
Solder Mask |
Green, Black, White, Red, Yellow, Blue and Purple, etc. |
|
Silkscreen color |
White, Blue, Black, Red, Yellow |
|
Surface finish |
HASL Lead free, Immersion Gold (ENIG), Immersion Tin, Immersion Silver, OSP, Carbon oil, etc. |
|
Special Techniques |
Impedance Control, Gold Fingers, Blind/Buried vias, Peelable solder mask, Half holes, Via-in-Pad and Countersink hole, etc. |
PCB Products Show
PCB Factory Show
Thick Copper PCB
Thick Copper PCB,Thick Copper PCB Board,Copper Thickness Tester PCB,Quality Thick Copper PCB
ZhongFeng Electronic Technology Co., Limited , http://www.dopcba.com