The world's first "head-changing" surgical patient will adapt to the new body through VR

Russian computer scientist Valery Spiridonov suffered from congenital muscular dystrophy from an early age and his physical condition deteriorated every year. Because he couldn't bear the pain of suffering, he wanted to have a healthy body before leaving the world, and he agreed to accept the surgeon's head transplant surgery, which will transplant Donova's head to the donor's healthy body. .

The world's first "head-changing" surgical patient will adapt to the new body through VR

He admits that he is very scared, but his condition has deteriorated in recent years and he decided to let go. Some people say that they hope to succeed, which will create a new future. However, the risk of head-changing surgery is too high, and medical scientists are suspicious of this. Even doctors have warned that the consequences of surgery are serious, and even "more difficult than death."

On Friday, the head of the "head-changing" surgery, surgeon Canavero, revealed in Glasgow that he would use VR to help patients prepare for the new life in advance. "The VR system is the best way for patients to prepare for the new world. He will face his new body."

Brain transplant patients may have psychological problems because they have to touch their new body. In preparation for the transplant, the patient will go through the VR phase for several months. The VR system was created by the American company Inventum Bioengineering Technologies.

Inventum CEO Alexander Pavlovcik said: "We are working with the latest developments in VR to help the world's first 'head change' patients prepare for post-operative body freedom."

Countdown Timer

FUNCTION DESCRIPTION

Countdown socket has an AC outlet, the maximum can output 230 V16A of power, there are two control modes, that is, countdown off and countdown on. It is convenient to control the equipment which needs to switch off or turn on AC. improve the safety of the use of some equipment and save more energy.


SET Timer

1,Countdown plug in the socket, all indicator lights red flash three times, at this time the socket has no output, for the normal state, into the countdown state. Click the button, the first red light up, the socket output after an hour off, and then short press the button can set the socket timing of 2 H.4H.6H.8H.10H.OFF.

2,Long press button 3s, all indicator lights green flash three times, at this time the socket has output, for the regular open state, into the countdown on state. Click on the button, the first green light on, the socket is closed an hour later, and then press the button to set the socket countdown 2 H.4H.6H.8H.10H.OFF.

3,Press button 3 longer S, all indicator lights red light flash 3 times again into countdown mode.

4,Select the required countdown time mode, the corresponding mode countdown lights up, start countdown until the end of the countdown time. The outlet that controls the output will start or stop the output.

5,After the countdown starts, the time indicator will change automatically from high to low until the countdown is over.

NOTE:

1,Check that the power connection is good.

2,Use only indoors and in dry places.

3,This product does not convert AC voltage.

4,Maximum load not exceeding 16A 3680W.

5,Grounding is required for safety.

6,Any questions, please contact the electrician.

countdown timer socket, countdown timer plug, Countdown digital timer, Countdown socket, countdown switch socket

NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com